Filter
Top Products
-20-
W1761/W1762 12" Table Saw with Riving Knife
SET UP
11. Fasten each support leg to the main extension table
with four M6-1 x 12 Phillips head screws and flat
washers as shown in
Figure 20.
12. Rotate both feet until they touch the ground, and
tighten the hex nuts to secure the feet.
13. Fasten the shelf end plate to the legs with four M6-1
x 12 Phillips head screws and flat washers as shown
in Figure 21.
14. Place the shelf brackets between the cabinet and
shelf end plate, and fasten with four M6-1 x 12 hex
bolts, and two flat washers and two hex nuts (on the
end plate), as shown in
Figure 22.
15. Place the lower shelf on the brackets.
16. Place the 93" fence tube over the 93" front rail and
secure with nine M8-1.25 x 12 flange bolts as shown
in Figure 23.
Figure 22. Shelf brackets installed.
Figure 23. Fence tube mounted to front
fence rail.
Shelf Bracket
Flange Bolt
Figure 21. Installing shelf end plate on
extension table legs.
Figure 20. Support leg fastened to main
extension table.
Flange