Filter
Top Products
-9-
W1816 Owner's Manual (Mfg. Since 10/09)
ELECTRICAL
ELECTRICAL
DO NOT work on your electrical system
if you are unsure about electrical
codes and wiring! Seek assistance from
a qualified electrician. Ignoring this
warning can cause electrocution, fire,
or machine damage.
220V Operation
The Model W1816 is wired for 220V single-phase
operation. The power supply circuit used for this machine
MUST be grounded and rated for the amperage given
below. Never replace a circuit breaker with one of higher
amperage without consulting a qualified electrician to
ensure compliance with wiring codes. This machine must
be connected to a grounded circuit!
A plug is not supplied with this machine. See below for
the recommended plug type for this machine.
If you are unsure about the wiring codes in your area
or you plan to connect your machine to a shared cir-
cuit, you may create a fire or circuit overload hazard—
consult a qualified electrician to reduce this risk.
We do not recommend using an extension cord; however,
if you have no alternative, use the following guidelines:
• UseacordratedforStandardService(S).
• Do not use an extension cord longer than 50 feet.
• Ensurethatthecordhasagroundwireandpin.
• Usethegaugesizelistedbelowasaminimum.
Extension Cords
Operating Voltage Phase Amp Draw Min. Circuit Size Recommended Plug Extension Cord
220V Operation
Single 22 Amps 30 Amps NEMA L6-30 10 Gauge, 3 Wire
Figure 1. NEMA L6-30 plug & receptacle.
L6-30 P
L6-30 R
Electrical Specifications
The machine must be properly set up before it is
safe to operate. DO NOT connect this machine to the
power source until instructed to do so in the "Test
Run" portion of this manual.