Filter
Top Products
-10-
W1816 Owner's Manual (Mfg. Since 10/09)
SETUP
This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.
Unpacking
SETUP
The following is a description of the components shipped
with the Model W1816. Lay the components out to
inventory them.
Note: If you can't find an item on this list, check the
mounting location on the machine or examine the
packaging materials carefully. Occasionally we pre-install
certain components for safer shipping.
Inventory (Figures 2–3) Qty
A. Blower Housing Assembly ................................1
— Motor ......................................................1
— Blower Housing ..........................................1
— Impeller ...................................................1
— Canister Filter Assemblies .............................2
— Canister Filter Clamps ..................................2
— Intake Cylinder ..........................................1
B. Lower Stand Legs ..........................................4
C. Upper Stand Legs ..........................................4
D. Lower Rear Stand Brace ..................................1
E. Stand Side Braces .........................................2
F. Stand Leg Connectors .....................................4
G. Upper Stand Braces .......................................2
Inventory
Figure 2. Blower housing assembly.
A
Keep machine disconnected from
power until instructed otherwise.
Figure 3. Stand components.
B
C
D
E
F
G