Filter
Top Products
&;>10A/1@41>5?7;25:6A>E:1B1>
/;::1/@<8A3@;<;C1>?;A>/1;A@81@
A:@58-88-??19.8E?@1<?->1/;9<81@10
$5<1:/1853:91:@
See figure 1.
1.Loosen fence locking knob.
2.Using a phillips screwdriver, loosen the two screws of the
fence alignment plate.
3.Adjust fence until it is aligned with two corresponding
indicator marks.
4.Tighten fence locking knob.
5.Re-tighten both screws on fence alignment plate.
$5<1:/1";5:@1>06A?@91:@
See figure 2.
The distance of the fence from the blade when ripping is
determined by lining the pointer with the desired dimension
on the scale.
&;-06A?@@41>5<21:/1<;5:@1>
1.Loosen fence locking knob.
2.Slide fence to a specific length (example: 4”).
3.Tighten fence locking knob.
4.Using a scrap piece of wood, make a small cut.
5.Measure your cut. If needed, adjust the fence until your
cut equals your desired length (4”).
6. Loosen pointer adjustment screw
7.Align pointer to mark on scale (4”).
8.Re-tighten pointer adjustment screw.
FIG. 1
FIG. 2
853:21:/1@;
5:05/-@;>9->7?
1:/1853:91:@
"8-@1%/>1C?
1:/1
;/75:3:;.
853:<;5:@1>
@;->7
";5:@1>
-06A?@91:@
?/>1C
??19.8E-:006A?@91:@?
WARNING
!