Filter
Top Products
Chapter3 Exchanging and updating data using a HotSync
®
operation
112
Advanced HotSync
®
operations
Tip
For best results, your computer and your CLIÉ handheld should be 4 to 8 inches
(approximately 10 to 20 centimeters) apart, and the path between your CLIÉ
handheld and the computer must be clear of obstacles.
5
Tap the icon.
The HotSync operation starts. Wait for the message showing that the
HotSync operation is complete.
To restore the local HotSync settings
1 Connect the cradle to your computer.
2 Click the HotSync icon in the Windows task tray and clear
the check mark of Local Serial from the shortcut menu.
3 Click the HotSync icon in the Windows task tray again and
select Setup from the shortcut menu.
The setup dialog box is displayed.
4 Click the Local tab to display the setting for a local HotSync
operation as needed.
5 Click OK.
Your computer is now ready to perform a local HotSync operation.