Filter
Top Products
Chapter3 Exchanging and updating data using a HotSync
®
operation
116
Advanced HotSync
®
operations
3
Tap the Enter phone # field.
The Phone Setup dialog box is displayed.
4
Change the following settings if necessary:
1 Enter the telephone number used to access the modem connected to
your computer.
If necessary, enter a dial prefix (such as “9”) to access an outside line,
and tap the Dial prefix check box. You can enter a comma in the field
to introduce a “pause” in the dialing sequence. Each comma equals a
two second pause.
2 If the phone line you are using for your CLIÉ handheld has Call
Waiting, select the “Disable call waiting” check box to avoid an
interruption during the modem HotSync operation.
3 If you want to use a calling card to place the call, select the “Use
calling card” check box and enter the calling card number.
Note
If you plan to connect to your company’s dial-in server (network modem) instead
of connecting to a computer modem, see “Conducting a HotSync
®
operation via a
network” on page 119.
5
Tap OK.
The HotSync screen is displayed again.
Continued on next page