Filter
Top Products
1 –Pump 9-Station Controller Chapter 3: Installation 21 of 38
Second Station Setup Screen
Once the settings have been entered into the initial Station Setup Screen, press F3 to access
the next set of configurable station settings. The second station setup screen (Figure 8) will
be shown.
Figure 8: Second Station Setup Screen
This screen will allow you to set/activate the following features:
• Purge Time – this is the length of time allowed for material to be cleaned out of the
system. Purge time duration is displayed in seconds and can be set from 1-999.
• Purge F2- this allows you to enable or disable the purge cycle by pressing the F2
button on the keypad.
• CL Loop F4 – this allows you to enable or disable the closed loop feature for this
station by pressing the F4 button on the keypad.
Once the values and settings have been entered, the operator can choose to do the following:
• Enter the settings from this screen for the next station in sequence (Press F5 while in
this screen)
• Enter additional settings for this station in the third setup screen (Press F3).
• Return to the Main Menu (Press F6).