Filter
Top Products
SBI-7426T-S3 Blade Module User’s Manual
4-8
Memory Support
The SBI-7426T-S3 blade module supports up to 96 GB/24 GB of VLP ECC Registered/
Unbuffered ECC DDR3-1333/1066/800 SDRAM in twelve DIMM sockets. See
Section 3-5 for further details on mainboard memory installation.
Hard Disk Drives
The SBI-7426T-S3 blade unit accommodates up to three 2.5" SAS2/SATA hard disk
drives, which are mounted in drive “carriers”. The drives are hot-swappable and can be
removed or replaced without powering down the blade unit they reside in. The three
drives can be used to set up a RAID array or JBOD. These drives use a yellow color for
the Blade HDD active LED.
WARNING: To maintain proper airflow, both hard drive bays must have drive
carriers inserted during operation whether or not a drive is installed in the carrier.