Filter
Top Products
SBI-7426T-S3 Blade Module User’s Manual
6-16
Choose Security from the AMI BIOS Setup Utility main menu with the arrow keys to
bring up the S
ECURITY SETUP menu (Figure 6-3). Security setting options are displayed
by highlighting the setting using the arrow keys and pressing <E
NTER>. All Security
BIOS settings are described in Table 6-17 below.
Table 6-17. Security Menu Options
Menu Option Description
Supervisor Password
This displays whether a supervisor password has been entered for the system.
“Not Installed” means that a Supervisor password has not been used.
User Password
This displays whether a user password has been entered for the system. “Not
Installed” means that a User password has not been used.
Change Supervisor
Password
Select this option and hit the <E
NTER> key to access the sub-menu and then
type in the Supervisor's password in the dialogue box to set or change the
Supervisor password, which allows access to the System’s BIOS.
Change User
Password
Select this option and hit the <ENTER> key to access a sub-menu with the
following options;
• Full Access (default) – This grants full user read and write acces to the
BIOS Setup Utility.
•V
IEW ONLY – This allows access to the BIOS Setup Utility, but does not
allow the fields to be changed.
•L
IMITED – This allows only limited fields to be changed such as DATE and
T
IME.
• No Access – This prevents User access to the BIOS Setup Utility.
NOTE: This option is only available when the Supervisor Password has been set
above.
Clear User Password This option allows you to clear a user password after it has been entered.
Password Check
This item allows you to check a password after it has been entered. The options
include Setup and A
LWAYS.
Boot Sector Virus
Protection
When E
NABLED, the AMI BIOS displays a warning when any program or virus
issues a Disk Format command or attempts to write to the boot sector of the hard
disk drive. Options include E
NABLED and Disabled.