Filter
Top Products
SBI-7426T-S3 Blade Module User’s Manual
6-18
AddOn ROM
Display Mode
This option allows you to set the display mode for Option ROM. Options include
Force BIOS or K
EEP CURRENT.
Bootup Num-Lock
Use this option to select a Power-on state for Numlock during boot-up. Options
include On (Power-on state) or O
FF.
PS/2 Mouse
Support
Use this option to select support for a PS/2 mouse in your system. Options
include Auto (for automatically detecting if a PS/2 mouse is present), D
ISABLED
or E
NABLED.
Wait for ‘F1’ If
Error
This option, when Enabled, causes your system to wait for the F1 key to be
pressed if an error occurs during bootup. Options include Enabled and
D
ISABLED.
Hit ‘Del’ Message
Display
When enabled, this feature displays a “Press DEL to run Setup” message in
POST. Options are Enabled and D
ISABLED.
Interrupt 19
Capture
When enabled, this feature allows option ROMs to trap Interrupt 19. Options
include Enabled and D
ISABLED.
Boot Device Priority
This sub-menu feature allows you to specify the sequence of priority for the boot
device (such as hard disk drives, USB devices, CD-ROM drives and so on). The
menu options are for 1
ST BOOT DEVICE, 2ND BOOT DEVICE and 3RD BOOT DEVICE.
Each numbered boot device can be set to a specific device installed in your
system or to D
ISABLED.
NOTE: A device enclosed in parenthesis has been disabled in the corresponding
type menu.
Hard Disk Drives
This sub-menu feature allows you to specify the boot sequence from all available
hard disk drives installed on your system. The settings for each are list of all
available hard disk drives in your system that have been detected or D
ISABLED.
Table 6-18. Boot Setup Menu Options (Continued)
Menu Option Description