Filter
Top Products
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–225
MEASUrement:MEAS<x>:SOURCE2?
REF
<Space>
?
MATH
<x>
MEASUrement
CH
HIStogram
:
:
MEAS
<x>
SOURCE2
CH<x> is an input channel.
MATH<x> is a math waveform.
REF<x> is a reference waveform.
HIStogram is a histogram (TDS 500C and 700C only).
MEASUREMENT:MEAS4:SOURCE2 CH<x>
sets channel 1 as the delay “to” source when making delay measurements.
MEASUREMENT:MEAS2:SOURCE2?
might return MATH1.
MEASUrement:MEAS<x>:STATE
Controls the measurement system. The source specified by MEASUre-
ment:MEAS<x>:SOURCE1 must be selected for the measurement to be
displayed. The source can be selected using the SELect:CH<x> command.
Measurement
MEASUrement:MEAS<x>:STATE { OFF | ON | <NR1> }
MEASUrement:MEAS<x>:STATE?
ON
<NR1>
MEAS
:
:MEASUrement
STATE
<x>
<Space>
OFF
?
Arguments
Examples
Group
Syntax