Filter
Top Products
27
B_04010
OPERATING MANUAL
VERSION 12/2012 ORDER NUMBER DOC 2330426
6 ASSEMBLY AND COMMISSIONING
6.3 ASSEMBLY
6.2 STORAGE
Install the pump on a at and horizontal foundation and screw it on tightly.
Ensure that all xing screws (diaphragm covers, manifold, covers) are correctly tightened.
Tighten the xing screws regularly depending on pump use. In the case of continuous
or prolonged operation, it is advisable to check at least once a week that there are no air
and/or liquid leaks.
6.1 TRANSPORTATION
The pump may be moved manually, without lifts and cranes.
Store the pump in a closed and dry environment.
Thoroughly clean the pump, if a long-term decommissioning is planned.
When resuming pump operation, proceed as described in the following sections.
Discharge of electrostatically charged components in atmospheres
containing solvents!
Explosion hazard from electrostatic sparks.
Clean the pump only with a damp cloth.
WARNING
Oblique ooring!
Risk of accidents if the unit rolls away/falls.
Place the frame with the pump horizontally.
Secure frame.
WARNING