Filter
Top Products
57
OPERATING MANUAL
VERSION 12/2012 ORDER NUMBER DOC 2330426
ZIP motor
Order No. Order No. Order No. Description
1 T6103.00 T6103.00S T6104.00 Motor
1 2 B0146.04 B0146.04 B0146.04 Feeler pin
2 2 B0147.71 B0147.71 B0151.71 Inner diaphragm disc
3 1 B0150.03 B0150.03S B0150.03 Shaft
4 1 F194.91 F194.91 F194.91 Cover (pressure side)
5
2 F829.07 F829.07 F829.07 Shaft guide bushing
6 1 F830.07 F830.07 F830.07 Cover (exhaust side)
7 1 T6103.00A T6103.00A T6104.00A Motor block with safety valve
8
1 G925.06 G925.06 G925.06 Reversing valve gasket
9
1 G7020.06 G7020.06 G7020.06 Pressure cover gasket
10 1 H618.07 H618.07 H618.07 Noise reduction
11 4 K1038.62 K1038.62 K1038.62 Screw
12 6 K1039.62 K1039.62 K1039.62 Screw
13 2 L470.06 L470.06 L470.06 Lip seal
14 2 L471.06 L471.06 L471.06 Lip seal
15 1 P4003.00 P4003.00 P4003.00 Reversing valve (*)
16 1 See pos. 7. See pos. 7. See pos. 7. Safety valve (**)
17 1 Z546.C0 Z546.C0 Z546.C0B Side label
18 4 K1040.62 K1040.62 K1040.62 Screw
19 4 3155401 3155401 3155401 Contact washer
20 4 K311.62 K311.62 K311.62 Self-locking nut M6
21 Z125.00 Z125.00 Z125.00 High-performance grease
(*) Includes pos. 8 and 9.
Not available separately
(**)
Wearing part
included in pump's service set
Incorrect maintenance/repair!
Danger to life and equipment damage.
Only a WAGNER service center or a suitably trained person may
carry out repairs and replace parts.
Only repair and replace parts that are listed in the chapter "Spare
Parts Catalogue" and that are assigned to the unit.
Before all work on the unit and in the event of work interruptions:
- Disconnect the control unit from the mains.
- Relieve the pressure from the spray gun and unit.
- Secure the spray gun against actuation.
Observe the operating and service instructions when carrying
out all work.
WARNING