Filter
Top Products
36
GM 5000EAC.
OPERATING MANUAL
EDITION 03/2012 PART NUMBER DOC 2319150
6 MAINTENANCE
➞ Observe safety instructions in chapter 2.
CAUTION
Cleaning agent in the air duct!
Functional faults caused by swollen seals
Never immerse the spray gun in cleaning agent.
SIHI_0066_GB
SIHI_0141_GB
WARNING
Incorrect maintenance/repair!
Risk of injury and damage to the equipment
Repairs and part replacement may only be carried out by
specially trained staff or a WAGNER service center.
Before all work on the unit and in the event of work interruptions:
- Switch off the energy/compressed air supply.
- Relieve the pressure from the spray gun and unit.
- Secure the spray gun against actuation.
Observe the operating instructions when carrying out all work.
6.1 PERIODICALLY CHECKS
For the safe operation of electrostatic manual coating systems for fl ammable liquid
spraying materials are intervals for periodically inspections defi ned as follows:
Inspection point Inspection interval Remarks
Gun cleaning, fl ushing daily Chapter 2.2.4; chapter 6.1
Earthing measures weekly Chapter 2.2.2; chapter 5.1.5
Inspection for damage weekly Chapter 6.2; 6.3; 6.4 and 6.5
Locking of the technical ventilation
with the electrostatic manual
coating system
yearly Chapter 5.1.2
The above recommended intervals are maximum values and may be modifi ed from
operator depending on the local and operational conditions and contamination.
Damaged devices must be taken out of service immediately and repaired.
The spray gun and the unit must be cleaned every day. Only use the cleaning solvent
recommended by the paint manufacturer.
6.2 CLEANING AND DECOMMISSIONING