2-45
Printing with EPSON Drivers for Macintosh | 45
3. Choose one of the following print queues:
• Stylus Pro 4000 (the standard setting) prints on cut sheet paper
with a bottom margin larger than the top and sides.
• Borderless (Auto Expand) prints on cut sheets and enlarges your
image (up to 3%) to fit the width of the paper (without side
borders).
• Borderless (Retain Size) prints your image at the size you specify
in your application. You need to size it slightly wider than the paper
width to print without side borders.
•Maximum reduces the bottom margin (available for printing on
plain paper sheets only).
• Roll Paper - Banner prints a series of continuous images without
any margin space between them, but with normal side borders.
• Roll Paper - Borderless (Auto Expand) prints without borders on
roll paper and enlarges your image (up to 3%) to fit the size of the
paper. This selection is recommended for borderless printing with
minimal clipping of your image. See page 46 for more information
about borderless printing.
• Roll Paper - Borderless (Retain Size) prints your image on roll
paper at the size you specify in your application. You need to size it
slightly wider than the paper width to print without borders. See
page 46 for more information about borderless printing.
• Roll Paper - Borderless Banner prints a series of continuous
borderless images without space between them.
• Roll Paper prints on roll paper with the standard printable area.
4. Click the
Paper Size pull-down menu.
• If you’re printing on cut-sheets, select the size of the paper loaded in
the printer. Then continue with step 7.
• If you’re using roll paper, EPSON recommends that you create a
custom paper size to make the best use of your paper. Click the
Settings pull-down menu (at the top of the screen) and select
Custom Paper Size.
sp4000Guide.book Page 45 Friday, October 22, 2004 5:06 PM
