2-61
Printing with EPSON Drivers for Macintosh | 61
5. Choose one of the following Auto Cut settings:
•Normal Cut allows margin space at the top and bottom of each
image.
• Double Cut extends the space between the images and trims each
print individually. This provides the cleanest edge for borderless
printing.
• Single Cut causes the images to be printed end-to-end and saves
paper. With borderless printing, you may see a sliver of the previous
or next image.
•Off disables automatic cutting. Choose this setting if you want to
operate the cutter manually, print multiple print jobs without
cutting, or if you are printing on heavy media that must be cut with
scissors. See page 38 for instructions on using the button to operate
the cutter.
6. Make the settings you want for
Orientation and Reduce or Enlarge.
7. Select any of the following options:
• Auto Rotate saves paper if your document length is shorter than
the printable width of the paper roll. Your image is rotated
automatically by 90 degrees and printed crosswise.
• Print Page Line prints trim lines on the right and bottom edges of
your pages.
• Save Roll Paper saves paper by not feeding the blank portion of
the last page of your document. Available only when you’ve selected
Roll Paper (Banner) as the Paper Source.
8. After making your settings, click
OK.
9. Print your image.
Note: These settings
override settings made
through the control panel.
sp4000Guide.book Page 61 Friday, October 22, 2004 5:06 PM
