6-16 CONVERTER SYSTEM
Drive Pulley
If the cover bushing is damaged or worn, replace the drive
pulley cover.
Cover Bushing Inside Diameter [A]
Standard: 27.985 ∼ 28.085 mm (1.1018 ∼ 1.1057 in.)
Service Limit: 28.12 mm (1.107 in.)
If the sheave bushing is damaged or worn, replace it.
Sheave Bushing Inside Diameter [A]
Standard: 37.985 ∼ 38.085 mm (1.4955 ∼ 1.4994 in.)
Service Limit: 38.12 mm (1.501 in.)
If the spider shoes [A] are damaged, replace them.
•
Check the spider shoe side clearance (see Spider Shoe
Side Clearance Inspection).
If the ramp weights [A] in the movable sheave are dam-
aged or w orn, replace them.
If the pins [B] are damaged or worn, replace them.
If the rollers [A] are damaged or worn, replace the spider
[B].
If the washers [C] are damaged or worn, replace the spi-
der.
