3-8 FUEL SYSTEM
Throttle Lever and Cable
Throttle Lever Free Play Inspection
•
Refer to the Throttle Lever Free Play Inspection in the
Periodic Maintenance chapter.
Throttle Lever Free Play Adjustment
•
Refer to the Throttle Lever Free Play Adjustment in the
Periodic Maintenance chapter.
Throttle Case Removal/Disassembly
•
Remove the throttle case screws [A] and pull the case
open.
•
Slide the cable adjuster dust cover out of place.
•
Remove the rubber cover [A].
•
Pull the c able tip [A] out of the throttle lever catch with the
throttle lever opened.
•
Loosen the locknut [B] and unscrew the adjuster [C].
•
Disassemble the throttle case as follows:
○
Remove the throttle lever screw [D], lockwasher, and flat
washer, and lift the throttle lever [E] and return spring from
the case.
○
Pull the throttle control lever [F] out of the case.
Throttle Case Assembly/Installation
•
Lubricate the throttle case and cable before assembly/in-
stallation.
•
Be certain that the return spring is correctly installed on
the throttle lever [A].
