12-10 FIN AL DRIVE
Specifications
Item Standard Service Limit
Output Bevel Gear Case
Output Bevel Gear Backlash 0.05 ∼ 0.11 mm (0.0020 ∼ 0.0043 in.) –––
(at output drive shaft spline)
Front Final Gear Case
Gear Case Oil (same engine oil):
Type API SF or SG –––
API SH or SJ with JASO MA class
–––
Viscosity
SAE 10W-40
–––
Oil Level
Filler opening bottom –––
Capacity 0.43 L (0.45 US qt) –––
Coupling Bushing Inside Diameter 13.000 ∼ 13.018 mm (0.5118 ∼ 0.5125 in.) 13.048 mm
(0.5137 in.)
LSD Clutch Torque:
(when variable differential control
lever is released.)
15 ∼ 20 N·m (1.5 ∼ 2.0 kgf·m, 11 ∼ 14 ft·lb) –––
(when variable differential control
lever is pulled in.)
157 N·m (16 kgf·m, 116 ft·lb) or more
–––
Bevel Gear Backlash 0.10 ∼ 0.20 mm (0.004 ∼ 0.008 in.) –––
(at pinion gear spline)
Rear Final Gear Case
Gear Case Oil:
Type
MOBIL Fluid 424 or CITGO TRANSGAR D
TRACTOR HYDRAULIC FLUID
–––
Oil Level Filler opening bottom –––
Capacity 0.9 L (0.95 US qt) –––
Rear Final Bevel Gear Backlash 0.04 ∼ 0.17 mm (0.002 ∼ 0.007 in.) –––
(at pinion gear spline)
