A SERVICE OF

logo

12/01 AWB2700-1428GB
Creating the connection
between PC and XC600
21
After confirming the entry, the name will appear in the Channels
column.
X Confirm the set parameters.
X In order to register the new channel for the gateway you must
log into the PLC via the Online menu.
The Login function also loads the project into the PLC.
X Log out again.
The channel is also displayed for control purposes in the Commu-
nication Parameters menu.
Figure 37: Setting up a channel for the connection from the
gateway to the runtime system of the PLC
Figure 38: Display of the channel in the Communication
Parameters window