A SERVICE OF

logo

12/01 AWB2700-1428GB
Configuring the XC600
controller
25
Configuring the XC600 controller
X Click the Resources tab to configure the XC600 with local
inputs/outputs.
The following window will appear:
X Double-click the PLC Configuration folder.
This will cause the PLC Configuration window to open:
X Select the element Configuration_XC600 and click the right
mouse button.
X Choose Append Subelement and click the module
XC-POW50-X-U....
Three tabs will be shown in the right pane:
The basic parameters are already assigned.
Figure 43: Configuring the XC-600 controller
Figure 44: Selecting a module
Figure 45: Module parameters display