12/01 AWB2700-1428GB
35
Starting programs
The CPU will process the executable program after the startup.
The program can be started in the following ways:
In the Online menu of XSoft via Start
The start command depends on the position of the OMS. You can
only execute Start/Stop commands via XSoft in the Online menu if
the OMS is set to RUN-P. The RUN/STOP LEDs indicate the current
status of the PLC.
Using the OMS of the operator module
To start the PLC switch the OMS from STOP to RUN-P or RUN. This
will start the program.
When changing from STOP to RUN (-P) the STOP LED will go out
and the RUN LED will light up.
The display shows:
Table 1: Loading and starting programs via the OMS
Display programs on the hard disk (internal) and on the
CompactFlash card (external)
After choosing the DISPLAY menu item you can then view the
content of the hard disk and the CompactFlash card:
X Use the MSS on the operator module to choose MAIN MENU r
PROGRAM r INTERNAL (or EXTERNAL) r DISPLAY.
The name of the program will appear. The large period character
in front of the name indicates that an executable version of this
program is also present in the working memory.
RUN-P You can use XSoft functions such as forcing whilst the
program is running.
RUN Access from the PC is not possible.
”P” if the OMS is set to RUN-P, ”R” if
the OMS is set to RUN
17:45:23 P
RUN
TESTPRO.PRO
>MAIN MENU
Executable
program
loaded
OMS position LEDs Display
STOP RUN SF
Current
status:
No STOP/RUN-P x – x STOP
PROG: ???
Operation on OMS
Load program
PC r PLC
Yes STOP/RUN-P x – x STOP
Test1.pro
Start program
Switch OMS:
STOP r RUN-P
RUN-P r STOP r RUN-P
Yes RUN-P – xxRUN
Test1.pro
Current
status:
Yes STOP x – – STOP
PROG2.pro
Load program
Overwrite existing program
Yes (new) STOP x ––STOP
Test1.pro
Start program
Switch OMS:
STOP r RUN-P
Yes RUN-P – x – RUN
Test1.pro
Current
status:
Yes RUN-P – x – RUN
STAMO.pro
Load program
Overwrite existing program
Yes (new) RUN-P x ––STOP
Test2.pro
Start program
Switch OMS:
RUN-P r STOP r RUN-P
Yes RUN-P – x – RUN
Test2.pro
h
Only bootable programs are displayed!
