Menu Overview of the Oper-
ator Module
12/01 AWB2700-1428GB
44
MAIN MENU: RECIPE
The menu structure of the of the recipe menu is the same as the
structure of the PROGRAM menu a Page 43.
The following figures provide an overview of the menu structure:
EXTERNAL/INTERNAL
The menus have the same structure.
MAIN MENU: DEVICE
The device menu is used to make all the entries relating to the PLC
itself. This includes settings for the interface, the clock, security
parameters and the dialogue language.
NETWORK
The device hasseveral default settings for the network connection.
These are shown in the following displays. These are IP-ADDRESS,
IP-MASK, GATEWAY and NAME.
IP-ADDRESS: the default address can be modified. You can then
select either BACK/EDIT/ENTER by turning the MSS. After the
address has been accepted, the system is started up with the new
address.
IP-MASK: This displays the default value.
GATEWAY: 000.000.000.000 is entered as the address. This
means that the Gateway function is disabled.
NAME:
DATE/TIME
Set here the date and time. The same procedure is used here as for
Password entry a Page 39.
SECURITY
This menu is used to set the password.
Function: The password is used to protect the status of the PLC
and its parameter settings from unauthorised access.
The status and settings are accepted and frozen when the pass-
word is activated. No more parameters can then be set via the
menu.
RECIPE:
INTERNAL
EXTERNAL
BACK
RECIPE-INT:
DISPLAY
ACTIVATE
DELETE
BACK
DEVICE:
NETWORK
DATE/TIME
SECURITY
LANGUAGE
SOFTWARE
HARDWARE
BACK
NETWORK:
IP-ADDRESS
IP-MASK
GATEWAY
NAME
IP-ADDRESS:
192.168.
119.001
BACK
IP-MASK:
255.255.
255.000
BACK
NAME:
CONTROL_1
BACK
DATE/TIME:
DATE
TIME
BACK
DATE
04:06:2001
BACK
SECURITY:
PASSWORD
ACTIVATE
BACK
