A SERVICE OF

logo

Open as PDF
next previous
Creating an Example Project
12/01 AWB2700-1428GB
24
Setting the target system
Once XSoft has started, create a new file:
X Choose File r New.
X Answer the question prompt about saving the old project.
X Set the target system, e.g. XC-CPU601-E4M.
The following window with four tabs will appear:
X Activate the General tab, select the Byte addressing mode
option and confirm the setting by clicking OK.
X Select the POU type (Program) and the programming language
(IL):
X Confirm your selection with OK.
A window will appear from which you can program or configure
systems:
Figure 40: Main window for target system settings
Figure 41: Selecting the POU type
Figure 42: POU type Program in IL format