3301770
Step 4. Boot from Windows installation CD-ROM (this requires you to set CD-ROM as the 1
st
Boot Device), when the Windows XP Setup blue screen appears and prompts users to
Press F6 if you need to install third-party SCSI or RAID driver, please press the F6 key.
Step 5. The setup program will continue, later when the setup program prompts users to
specify additional adapters, please press the S key.
Step 6. Then the setup program will prompt user to insert the driver diskette. Please insert
the driver diskette your prepared previously, and then press ENTER to continue.
Step 7. The follow-up window will list out the installation choices, please select ALi
SATA/RAID Controller for Windows XP and press ENTER to continue.
Step 8. The follow-up window will list out the devices to be installed, in which selected ALi
controller(s) should be included.
Step 9. Repeat step 5, but select ALi ATA/RAID Controller at step 7. If both controllers are
installed, go to next step.
Step 10. If users want to install other devices, please operate at this time. If all devices have
been successfully installed, please go to next step.
Step 11. Press Enter to continue Windows XP setup.
Installation Steps under Existing Windows XP
After Windows XP is started, Windows system will automatically find the newly installed adapter
and prompt user to install its driver. Please follow these steps to install the driver:
Step1. When the Found New Hardware Wizard windows appear(Mass Storage Controller),
select Install from a list or specify location(Advanced) and click Next to continue.
Step 2. In the follow-up window, please select "Don't search, I will choose the driver to install",
then click Next to continue.
C-5
