Agilent Technologies 6812B Welding System User Manual


 
3 - Language Dictionary
104
SYSTem:LANGuage
Sets the command language of the ac source to either SCPI or Elgar Model 9012 PIP. The language
selection is stored in non-volatile memory and is retained after power-off. Both the command and query
form can be given regardless of the current language. Refer to Appendix D for more information.
Command Syntax
SYSTem:LANGuage <language>
Parameters
SCPI | E9012
Example
SYST:LANG SCPI
Query Syntax
SYSTem:LANGuage?
Returned Parameters
<CRD>
SYSTem:LOCal
This command can only be used with the RS-232 interface. It sets the interface in Local state, which
enables the front panel controls.
Command Syntax
SYSTem:LOCal
Parameters
None
Example
SYST:LOC
Related Commands
SYST:REM SYST:RWL
SYSTem:REMote
This command can only be used with the RS-232 interface. It sets the interface in the Remote state, which
disables all front panel controls except the Local key. Pressing the Local key while in the Remote state
returns the front panel to the Local state.
Command Syntax
SYSTem:REMote
Parameters
None
Example
SYST:REM
Related Commands
SYST:LOC SYST:RWL
SYSTem:RWLock
This command can only be used with the RS-232 interface. It sets the interface in the Remote-Lockout
state, which disables all front panel controls including the Local key. Use SYSTem:LOCal to return the
front panel to the Local state.
Command Syntax
SYSTem:RWLock
Parameters
None
Example
SYST:RWL
Related Commands
SYST:REM SYST:LOC