Agilent Technologies 6812B Welding System User Manual


 
Language Dictionary - 3
67
FREQuency:TRIGgered
This command programs the frequency that the output will be set to during a triggered step or pulse
transient.
Command Syntax
[SOURce:]FREQuency:TRIGgered <NRf+>
Parameters
refer to Specifications Table in User’s Guide
Unit
HZ
(hertz)
*RST Value
60
Examples
FREQ:TRIG 50
Query Syntax
[SOURce:]FREQuency:TRIGgered?
Returned Parameters
<NR3>
Related Commands
FREQ FREQ:MODE