Agilent Technologies 6812B Welding System User Manual


 
Language Dictionary - 3
33
CALibrate:VOLTage:OFFSet
Agilent 6811B, 6812B, 6813B, Only
This command can only be used in calibration mode. It initiates the calibration of the offset voltage
programming circuits.
Command Syntax
CALibrate:VOLTage:OFFSet
Parameters
None
Examples
CAL:VOLT:OFFS
Related Commands
CAL:SAVE CAL:STAT CAL:LEV
CALibrate:VOLTage:PROTection
This command can only be used in calibration mode. It calibrates the overvoltage protection (OV) circuit.
The automatically performs the calibration and stores the new OV constant in nonvolatile memory.
CALibrate:VOLTage:PROTection is a sequential command that takes several seconds to complete.
Command Syntax
CALibrate:VOLTage:PROTection
Parameters
None
Examples
CAL:VOLT:PROT
Related Commands
CAL:SAVE CAL:STAT
CALibrate:VOLTage:RTIMe
Agilent 6843A Only
This command can only be used in calibration mode. It calibrates the realtime voltage programming
circuit.
Command Syntax
CALibrate:VOLTage:RTIMe
Parameters
None
Examples
CAL:VOLT:RTIM
Related Commands
CAL:SAVE CAL:STAT