Alpine CVA-1005R Saw User Manual


 
12
English
Precautions
Temperature
Be sure the temperature inside the vehicle is
between +45˚C (+113˚F) and 0˚C (+32˚F)
before turning your unit on.
Fuse Replacement
When replacing the fuse(s), the replacement
must be of the same amperage as shown on
the fuse holder. If the fuse(s) blows more than
once, carefully check all electrical connections
for shorted circuitry. Also have your vehicle's
voltage regulator checked.
Maintenance
If you have problems, do not attempt to repair
the unit yourself. Return it to your Alpine dealer
or the nearest Alpine Service Station for
servicing.
Before inserting an MD
Use your finger to feel around the outer edge of
the MD. If you feel any small bumps, remove
the bumps before inserting.
Inserting an MD with bumps could severely
damage the mechanism.
Using an MD
Check and ensure the following:
Under no circumstances should you open the
MD's shutter and touch the inside of the disc.
Do not expose the MD to direct sunlight. Place
only 1 label in its proper position. Make sure the
MD is clean and not warped before inserting
into the player. (See page 228.)
Bumps
Résidus
Abultamientos