Alpine CVA-1005R Saw User Manual


 
English
138
Audio Processor
Operation (Optional)
6
Rotate the rotary encoder clockwise or
counterclockwise to adjust the Cross-Over point
upward or downward to your desired point.
7
When the adjustment has been completed,
press the FUNC (RETURN) button. The display
returns to the Divider mode screen.
8
RETURN
Rotate the rotary encoder and select the
channel that you wish to adjust.
Each press changes the channel as follows.
When only one 2-way divider is connected:
Low F-High R-High
When two 2-way dividers are connected:
Low High
Each time the 6 (F/R) button is
pressed, the mode switches between
the Front adjustment and Rear adjust-
ment modes, and the display also
changes.
Low High
When only one 3-way divider is connected:
Low Mid-L Mid-H High
When two 3-way dividers are connected:
Low Mid-L Mid-H High
Each time the 6 (F/R) button is
pressed, the mode switches between
the Front adjustment and Rear adjust-
ment, and the display also changes.
Low Mid-L Mid-H High