Alpine CVA-1005R Saw User Manual


 
English
220
Remote Control (RUE-4167
supplied with IVA-M700R/CVA-1005R)
Basic Mode
1Remote Control Signal Transmitter
2Signal Transmitter Indicator
3Rotary Encoder/Volume Control
Rotate to the right or left in the same manner
as for the Rotary Encoder on IVA-M700R/
CVA-1005R.
4NAVI/AUDIO Switch
NAVI: Select this position to activate
Navigation mode.
AUDIO: Select this position to activate Audio
mode.
5ENT (Enter) Button
Press to execute the selection. (The same
function as the rotary encoder on IVA-M700R/
CVA-1005R.)
:/J Button
Press and hold this button for more than 2
seconds to play or pause.
6A.PROC (Audio Processor) Button
Switches the audio processor modes such
as equaliser, surround, etc.
7MUTE Button
Press the button to lower the volume level by
20 dB instantly. Press the button again to
return to the previous volume level.
8TUNER Button
Press the button to select the radio mode.
9DISC Button
Press to switch to the CD/MD mode.
!CHG (Changer) Button
Press to switch to the changer mode.
"POWER Button
Press to turn the power On or Off.
#Numeral Keys
The key numbers from 1 to 7 have the same
functions as for the 1 to FUNC buttons on
IVA-M700R/CVA-1005R.
$DEL (Angle Down) button
Pressing this button changes the monitor
angle downward.
%"O" (Open/Close) Button
When the monitor is closed: raises the
monitor.
When the monitor is open: adjusts the
monitor angle back and forth.
When the "O" (Open/Close) button is
pressed and held for more than 2 seconds,
the monitor is housed into the monitor
compartment.
&"OK" (Angle Up) Button
Changes the monitor angle upward.
* Not used.
DEL
OK
12
3
45
6
78
9
0
SOURCE
VOICE
BAND
POWER
V.SEL
DISC
CHG
DEFEAT
ZOOM
MUTE
DISP
MENU
LIST
RETURN
V
O
L
D
N
V
O
L
U
P
A.PROC
ROUTE
DEST.
LO.PT.
TUNER
NAVI
POWER
NAVI OFF
ENT
POS.
5
8
2
4
!
3
7
9
6
1
"
$
&
#
%