Filter
Top Products
28
English
Basic Operation
Press and hold the OPEN/CLOSE button for at
least 2 seconds while the monitor is being
raised. Each press changes the monitor angle
back or forth.
1
1
Selecting the Monitor
Opening Angle
The monitor opening angle can be set in 2
positions.
Press the and buttons to adjust the
monitor's angle so the screen will be in the best
viewing position. Each press of the buttons
produces a beep and changes the screen angle
between 80 and 104 degrees.
Notes: • If the monitor touches an obstacle
while the angle is being adjusted the
unit will stop the screen immediately.
Should this happen, remove the
obstacle and press the or
button again.
• The screen colour will vary when
viewed at certain angles. Adjust the
screen angle for the best viewing
position.
• If the voltage of the vehicle's battery
power is low, the screen may blink
when the screen angle is changed.
This is normal and not a malfunction.
Adjusting the Monitor
Viewing Angle
Adjust the monitor's angle for better visibility.
1
1