Filter
Top Products
INSTALLATION : ACCESSORY OPTIONS
02.9812.0001C 27
2
Accessory Options
Follow Spot Operation
The Bad Boy™ Luminaire may also be used as a follow spot fixture. A Follow Spot Handles Kit
(28.9812.0688) is available for this purpose. The kit includes three handles so that follow spot
operation may be accomplished from the side of the fixture (using the two side handles) or from the
rear of the fixture (using the two rear handles). When operating as a follow spot, the pan/tilt should be
configured for "free" movement (refer to "Enabling Pan/Tilt Free Mode" on page 28).
To install follow spot handles:
Step 1. At Head Cover, remove two 8-32 x 3/8" PPB screws as shown in Figure 2-17.
Step 2. Install one Front Mount and two Rear Mounts using supplied hardware.
Figure 2-17: Installing Follow Spot Handles - Step 1
8-32 x 3/8" PPB Screw (2)
Front Handle Mount
(10.9812.0688)
Rear Handle Mount
(10.9812.0689)
8-32 x 5/8" SHCS Screw (2)
(53.6696.0625.0)
10-32 x 5/8" SCB Screw
(53.6515.0625.0)