Filter
Top Products
2AA6;4'<;<D,<B?!6A2?&.D
"#''<C62D6A2:@A5?<B45@22=.42
.@2 EA2;@6<; 9.:=6;4 2C2?@ – Lock the
base extensions at the desired positions.
&9616;4 .@2 EA2;@6<;@ – Provide extra work
support. Useful when cutting long workpieces.
%B//2?23920A<? – Attaches to bottom of chute.
Deflects dust into the chute.
B@A5BA2 – Directs sawdust up and through the
elbow and to the bag.
B@A.4 – Has a zipper at the bottom. Bag can
be uncoupled for emptying.
&9612%.69 <08;</ – The slide rail lock knob
locks the slide rail when you are not making slide
cuts and when you are transporting the saw.
9.:= – Use to hold the workpiece to the table
and base – insert into clamp post location
(item 32).
2=A5&A<=&0?2D – Turn the knob end to adjust
the blade depth for cutting grooves.
2=A5 &A<=$9.A2 – Plate can be swung out to
limit the depth of the blade travel.
XBE696.?F9.:=<92 – used to appropriately
clamp material at angles from 55˚to 60˚ right.
23A2C29&A<=6;160.A<? – allows you to set the
most common bevel stops 0°, 22.5°, 33.9°, 45°
and 47° Left.
9.12<9A<C2?$9.A2 – Covers the blade bolt.
2C29 &0.92 .;1 $<6;A2?@ – Scale is large to
allow user to easily read bevel angles. Pointer
indicates what the current angle is.
9.:=$<@A <0.A6<;@ – Two vertical post holes in
the base provided to insert the clamp (item 26).
!6A2? 2A2;A $9.A2 &0?2D@ – Four screws
accessible through holes in the miter scale. These
screws are loosened when adjusting position of
the detent plate.
?/<? <08 – Press arbor lock button to keep
blade from rotating when loosening or tightening
arbor bolt during blade removal or installation.
!<A<?.= – Provides access for inspecting and
replacing brushes.
2.1 @@2:/9F <08 $6; – Used to lock the
head assembly in the lower position for
transporting.
2C29 <08 2C2? – The front-positioned bevel
lock lever locks the head assembly at the desired
bevel angle.
'<= .??F6;4 .;192 – Used for lifting and
transporting of saw.
.@A6; .??F .;192@ – Used for lifting and
transporting of saw.
24?22 2C29 &A<= – Can slide forward to
allow for -2 degree bevel cuts.
::52E82F – Used to change the blade and to
make tool adjustments.
38
3
2
33
34
35
3
7
39
40
3
6
4
1
42
BM 2610025580 05-13_BM CM8S 5/17/13 1:37 PM Page 9