Filter
Top Products
SKU 91482 For technical questions, please call 1-800-444-3353. Page 10
28. Turn off the Tile Saw and allow the Saw Blade to stop on its own if the Saw
Blade is to be backed out of an uncompleted cut.
29. Never attempt to remove material stuck in the Tile Saw while it is plugged
in or running.
30. When cutting a large workpiece make sure its entire length is properly
supported.
31. Never stand on the Tile Saw. Serious injury can result if the Tile Saw is tipped
or if the rotating Saw Blade is accidently contacted.
32. Industrial applications must follow OSHA requirements.
33. For your safety: In extreme working conditions the Circuit Breaker will auto-
matically switch off the Motor to prevent overheating. In this event, turn the
Power Switch to its “OFF” position. Wait five minutes or until the Motor has
cooled. Depress the Circuit Breaker. Then, turn the Power Switch to its “ON”
position to resume cutting. If the Circuit Breaker continues to trip, have the tool
serviced by a qualified technician.
NEVER attempt to disable the Circuit Breaker.
34. Always turn off the Tile Saw, unplug it from its electrical outlet, and allow it
to stop before changing accessories or performing any inspection, mainte-
nance, or cleaning procedures.
35. WARNING! Some dust created by power sanding, sawing, grinding, drill
ing, and other construction activities, contain chemicals known (to the State of
California) to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are: lead from lead-based paints, crystalline silica
from bricks and cement and other masonry products, arsenic and chromium from
chemically treated lumber. Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your exposure to these chemicals:
work in well ventilated areas, and work with approved safety equipment such as
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
36. WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
37. WARNING! The warnings and cautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.