Chicago Electric Cookerhoods Saw User Manual


 
SKU 91482 For technical questions, please call 1-800-444-3353. Page 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 18
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
Item Description
Electrical Requirements 120 V / 60 Hz / 1800 W / Single Phase
20 AMP Circuit Breaker
15 Amps
3-Prong, Grounded Power Cord Plug
Motor 2.5 HP / 3,450 RPM
Blade Speed 3,400 RPM
Product Compatibility For use with SKU 91483 Stand (not included).
Cutting Capacity 24” Rip Length / 16” Diagonal / 3-3/4” Maximum Depth
Saw Blade (not included)
Requirements
10” Continuous Rim, Diamond w/ 5/8” Round Arbor Hole
*Must Be Rated At 3,500 RPM Or Greater.
Drive Type Belt Drive / Size A660.
Angle Cutting Capacity 45° Left & Right Miter Block / 45° Right Bevel Block.
Water Pump Capacity 3.17 Gallons Per Minute.
Overall Dimensions 41” L x 21” W x 20-1/2” H.
Weight 113 Pounds.
E221466
REV 04/05