Filter
Top Products
5-4
Cisco MGX Route Processor Module (RPM-PR) Installation and Configuration Guide
Release 2.1, Part Number 78-12510-02 Rev. C1, August 31, 2004
Chapter 5 Configuring the MGX RPM-PR
Booting the RPM-PR
drwxrwxrwx 1 0 0 13312 May 11 15:47 ./
drwxrwxrwx 1 0 0 13312 May 11 17:10 ../
-rwxrwxrwx 1 0 0 2253552 May 11 15:47 mpsm_t1e1_030.000.004.016-P2.fw
-rwxrwxrwx 1 0 0 10655280 Apr 2 08:46 rpm-js-mz.123-2.T5
-rwxrwxrwx 1 0 0 3350304 Apr 2 08:46 rpm-boot-mz.123-2.T5
-rwxrwxrwx 1 0 0 1431512 May 11 15:47 mpsm_t1e1_030.000.004.016-P1_bt.fw
-rwxrwxrwx 1 0 0 1030532 May 11 15:46 frsm_vhs_022.000.005.019-A.fw
-rwxrwxrwx 1 0 0 891552 May 11 15:46 frsm_8t1e1_022.000.005.019-A.fw
-rwxrwxrwx 1 0 0 303936 May 11 15:46 cesm_t3e3_CE8_BT_1.0.02.fw
-rwxrwxrwx 1 0 0 641312 May 11 15:46 cesm_t3e3_022.000.005.019-A.fw
-rwxrwxrwx 1 0 0 743136 May 11 15:46 cesm_8t1e1_022.000.005.019-A.fw
-rwxrwxrwx 1 0 0 826392 May 11 15:38 vxsm_005.000.004.034-A_bt.fw
-rwxrwxrwx 1 0 0 10528336 May 11 15:38 vxsm_005.000.004.034-A.fw
-rwxrwxrwx 1 0 0 7939476 May 11 15:38 pxm45_005.000.004.034-A_mgx.fw
-rwxrwxrwx 1 0 0 1160328 May 11 15:37 pxm45_005.000.004.034-A_bt.fw
-rwxrwxrwx 1 0 0 468388 May 11 15:46 frsm_vhs_VHS_BT_1.0.06.fw
-rwxrwxrwx 1 0 0 1245112 May 11 15:37 mpsm155_005.000.004.034-P1_bt.fw
-rwxrwxrwx 1 0 0 4069552 May 11 15:37 mpsm155_005.000.004.034-P1.fw
-rwxrwxrwx 1 0 0 737896 May 11 15:37 frsm12_005.000.004.034-A_bt.fw
-rwxrwxrwx 1 0 0 2490064 May 11 15:37 frsm12_005.000.004.034-A.fw
-rwxrwxrwx 1 0 0 3674368 May 11 15:36 axsmxg_005.000.004.034-P1.fw
-rwxrwxrwx 1 0 0 838840 May 11 15:36 axsmxg_005.000.004.034-A_bt.fw
-rwxrwxrwx 1 0 0 742168 May 11 15:36 axsme_005.000.004.034-A_bt.fw
-rwxrwxrwx 1 0 0 297988 May 11 15:46 frsm_8t1e1_FR8_BT_1.0.02.fw
-rwxrwxrwx 1 0 0 264592 May 11 15:46 cesm_8t1e1_CE8_BT_1.0.02.fw
-rwxrwxrwx 1 0 0 3111904 May 11 15:36 axsme_005.000.004.034-A.fw
-rwxrwxrwx 1 0 0 744600 May 11 15:36 axsm_005.000.004.034-A_bt.fw
-rwxrwxrwx 1 0 0 3267520 May 11 15:36 axsm_005.000.004.034-A.fw
-rwxrwxrwx 1 0 0 248686 May 11 15:32 vism_8t1e1_VI8_BT_3.2.00.fw
-rwxrwxrwx 1 0 0 4135448 May 11 15:32 vism_8t1e1_003.053.103.007-I.fw
-rwxrwxrwx 1 0 0 4135000 May 11 15:32 vism_8t1e1_003.003.103.007-I.fw
In the file system :
total space : 818961 K bytes
free space : 704028 K bytes
M8850_LA.8.PXM.a >
Initializing the RPM-PR Card
To initialize the RPM-PR card, please refer to the Cisco MGX 8850 (PXM1E/PXM45), MGX 8950, MGX
8830, and MGX 8880 Configuration Guide, Release 5.
To verify the version, enter the show version or show bootvar commands. See the “Verifying the
Configuration” section later in this chapter.
Assigning an IP Address to the Switch Interface
You need to assign an IP address for the RPM-PR on the ATM switch. This procedure tells you how to
configure the ATM switch interface with the IP address.
Timesaver Obtain the correct IP and ATM network addresses for your RPM-PR on the ATM switch from your
system administrator or consult your network plan to determine correct addresses before you
continue to configure the RPM-PR.