Filter
Top Products
1-21
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02
Chapter 1 Preparing for Installation
Cisco ASR 9001 Router Port Connection Guidelines
• One grounding wire. Although we recommend at least six AWG multistrand copper wire, the wire
diameter and length depend on your router location and site environment.
Note These parts are not available from Cisco, but they are available from external commercial vendors.
Cisco ASR 9001 Router Port Connection Guidelines
This section contains detailed cabling and signal information for all interface and port connections to the
RP. It also provides information for Ethernet routing and equipment.
Caution Ports labeled Ethernet, SYNC, CONSOLE, and AUX are safety extra-low voltage (SELV) circuits. SELV
circuits should only be connected to other SELV circuits.
Note In Cisco ASR 9001-S Router, two 10 GE fixed SFP+ ports (SFP+2 and SFP+3) are disabled by default,
and can be enabled by a license upgrade.
Figure 1-23 shows all the port connections on the front panel of the Cisco ASR 9001 Router.
Figure 1-23 Cisco ASR 9001 Router Front Panel Ports
Table 1-2 lists the Cisco ASR 9001 Router front panel ports description.
1 3 4 5 6 687
332426
92
1 Service LAN and ToD ports 6 External USB port
2 10MHz and 1PPS indicators 7 Eight discrete LED indicators
3 SYNC (BITS/J.211) ports 8 CLUSTER ports
4 CONSOLE and AUX ports 9 Fixed SFP+ ports
5 Management LAN ports