Filter
Top Products
Contents
v
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02
Cable Management Bracket 3-14
Installing a Cable Management Bracket 3-14
Removing a Cable-Management Bracket 3-15
Connecting Route Processor Cables 3-16
Connecting to the RP Console Port 3-17
Connecting to the RP Auxiliary Port 3-17
Connecting to the RP Ethernet Management Ports 3-17
Connecting Power to the Router 3-18
Connecting Power to an AC-Powered Router 3-18
Connecting Power to a DC-Powered Router 3-20
Powering on the Router 3-21
CHAPTER
4 Troubleshooting the Installation 4-1
Troubleshooting Overview 4-1
Troubleshooting Using a Subsystem Approach 4-1
Normal Router Startup Sequence 4-2
Identifying Startup Issues 4-2
Troubleshooting the Power Subsystem 4-3
Troubleshooting the AC-Input Power Subsystem 4-3
Troubleshooting the DC-Input Power Subsystem 4-5
Troubleshooting a DC Power Module 4-5
Additional Power Subsystem Troubleshooting Information 4-6
Hardware and Software Identification 4-6
Obtaining Temperature and Environmental Information 4-6
Troubleshooting the Power Distribution System 4-8
Troubleshooting the Route Processor Subsystem 4-9
Route Processor Overview 4-9
RP Front Panel Indicators 4-10
Ethernet Ports and Status LEDs 4-11
Auxiliary and Console Ports 4-11
Monitoring Critical, Major, and Minor Alarm Status 4-12
Troubleshooting the Line Card 4-12
Initial Boot Process 4-12
Status LEDs 4-12
Configuring and Troubleshooting Line Card Interfaces 4-13
Configuration Parameters 4-13
Line Card Interface Address 4-14
Using Configuration Commands 4-14
Basic Line Card Configuration 4-14