Filter
Top Products
A-5
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
OL-26701-02
Appendix A Technical Specifications
Table A-9 lists the power consumption specifications for a fully configured chassis.
Caution Be sure that the chassis configuration complies with the required power budgets. Failure to properly
verify the configuration may result in an unpredictable state if one of the power units fails. Contact your
local sales representative for assistance.
Table A-10 lists the supported Gigabit Ethernet SFP modules and describes their operating parameters.
Table A-11 lists the supported 10-Gigabit Ethernet
SFP+ transceivers modules and describes their
operating parameters.
Table A-9 Cisco ASR 9001 Router Chassis Power Consumption Specifications
Description Value
Power consumption 400 W at 77
°F (25°C)
425 W at 104
°F (40°C)
450 W at 131
°F (55°C)
Table A-10 Supported Fast Ethernet and Gigabit Ethernet SFP Modules
Part Number Description Wavelength Fiber Type
Typical Maximum
Distance
Supported Trirate Copper SFPs
SFP-GE-T Transceiver Module for Category 5 copper wire n/a Copper 328.08 feet (100 m)
Supported Gigabit Ethernet SFPs
GLC-GE-100FX 100BASE-FX SFP for Gigabit Ethernet ports 1310 nm MMF 1.24 miles (2 km)
GLC-BX-D 1000BASE-BX SFP 1490 nm TX
1310 nm RX
SMF 6.2 miles (10 km)
GLC-BX-U 1000BASE-BX SFP 1310 nm TX
1490 nm RX
SMF 6.2 miles (10 km)
GLC-SX-MMD 1000BASE-SX Short Reach (DOM) 850 nm MMF 984.25 feet (300 m)
GLC-LH-SMD 1000BASE-LX/LH Long Reach (DOM) 1310 nm SMF 6.21 miles (10 km)
GLC-EX-SMD 1000BASE-EX Long Reach (DOM) 1310 nm SMF 24.85 miles (40 km)
GLC-ZX-SMD 1000BASE-ZX Extended Reach (DOM) 1550 nm SMF 49.7 miles (80 km)
Table A-11 Supported SFP+ Transceivers
Part Number Description Wavelength Fiber Type
Typical Maximum
Distance
SFP-10G-ER Cisco SFP+ for 10-Gigabit Ethernet
Extended Reach
1550 nm SMF 24.85 miles
(40 km)