Filter
Top Products
1-3
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
OL-4309-07
Chapter 1 Overview
Hardware Features
Hardware Features
This section describes the access point features. Refer to Appendix C, “Access Point Specifications,” for
a list of access point specifications.
Key hardware features of the 1100 series access point include:
• Single Radio Operation, page 1-3
• Ethernet Port, page 1-3
• LEDs, page 1-4
• Power Sources, page 1-4
• UL 2043 Certification, page 1-5
• Anti-Theft Features, page 1-5
Figure 1-1 shows the location of some of the hardware features of the access point.
Figure 1-1 Access Point Layout and Connectors
Single Radio Operation
The access point contains a 2.4-GHz radio (IEEE 802.11b-compliant or IEEE 802.11g-compliant) in a
mini-PCI slot and two 2.2-dBi dipole integrated antennas. You can perform a field upgrade to the
mini-PCI radio and antennas to support new radio technologies, such as the 2.4-GHz
IEEE 802.11g-compliant radio.
Ethernet Port
The auto-sensing Ethernet port accepts an RJ-45 connector, linking the access point to your 10BASE-T
or 100BASE-T Ethernet LAN. The access point can receive power through the Ethernet cable from a
power injector, switch, or power patch panel. The Ethernet MAC address is printed on the label on the
back of the access point.
1 2 3 5
81180
6
4
1 48-VDC power port 4 Mode button
2 Ethernet port (RJ-45) 5 Status LEDs
3 Cable lock slot 6 Antenna