MPLS Forwarding Commands on Cisco IOS XR Software
show mpls label range
MPR-164
Cisco IOS XR Multiprotocol Label Switching Command Reference
show mpls label range
To display the range of local labels available for use on packet interfaces, use the show mpls label range
command in EXEC mode.
show mpls label range
Syntax Description This command has no arguments or keywords.
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
You can use the show mpls label range command to configure a range for local labels that is different
from the default range.
Task ID
Examples The following is sample output from the show mpls label range command:
RP/0/RP0/CPU0:router# show mpls label range
Range for dynamic labels: Min/Max: 16/1048575
Table 39 describes the significant fields shown in the display.
Related Commands
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
mpls-te or mpls-ldp or mpls-static read, read, read
Table 39 show mpls label range Field Descriptions
Field Description
Range for dynamic labels Minimum and maximum allowable range for local labels (which
differs from the default range).
Command Description
mpls label range Configures a range of values for use as local labels.