Filter
Top Products
MPLS Forwarding Commands on Cisco IOS XR Software
show mpls label table
MPR-165
Cisco IOS XR Multiprotocol Label Switching Command Reference
show mpls label table
To display the local labels contained in the MPLS label table, use the show mpls label table command
in EXEC mode.
show mpls label table table-index [application application | label label value | summary]
Syntax Description
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Task ID
Examples The following is sample output from the show mpls label table command:
RP/0/RP0/CPU0:router# show mpls label table 0
Table Label Owner State Rewrite
----- ------- ---------- ------ -------
0 0 LSD InUse Yes
0 1 LSD InUse Yes
0 2 LSD InUse Yes
0 3 LSD InUse Yes
0 16 TE-Link InUse Yes
table-index The index of the label table to display. The global label table is 0.
Currently, you can specify table 0 only.
application application (Optional) Displays all labels owned by the selected application.
Options are: bgp-ipv4, bgp-vpn-ipv4, internal, ldp, none, rsvp, static,
te-control, te-link, test, snmp.
label label value Displays a selected label based on the label value. Range is 0-1048575.
summary Displays a summary of local labels.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
mpls-te or mpls-ldp or mpls-static read, read, read