Filter
Top Products
MPLS Forwarding Commands on Cisco IOS XR Software
show mpls traffic-eng fast-reroute log
MPR-176
Cisco IOS XR Multiprotocol Label Switching Command Reference
Task ID
Examples The following is sample output from the show mpls traffic-eng fast-reroute log command:
RP/0/RP0/CPU0:router# show mpls traffic-eng fast-reroute log
Node Protected LSPs Rewrites When Switching Time
Interface (usec)
-------- --------- ----- -------- ---------------------- --------------
0/0/CPU0 PO0/1/0/1 1 1 Feb 27 19:12:29.064000 147
0/1/CPU0 PO0/1/0/1 1 1 Feb 27 19:12:29.060093 165
0/2/CPU0 PO0/1/0/1 1 1 Feb 27 19:12:29.063814 129
0/3/CPU0 PO0/1/0/1 1 1 Feb 27 19:12:29.062861 128
Table 44 describes the significant fields shown in the display.
Related Commands
Task ID Operations
mpls-te read
Table 44 show mpls traffic-eng fast-reroute log Field Descriptions
Value Description
Node Node address.
Protected Interface Type and interface-id that is being protected.
LSPs Link-state packet (LSP) associated with each interface being protected.
Rewrites Number of rewrites initiated on the LSP.
When Date the interface was protected.
Switching Time Time required to switch the protected interface in micro-seconds.
Command Description
show mpls traffic-eng fast-reroute database Displays the contents of the FRR database.