Filter
Top Products
MPLS Forwarding Commands on Cisco IOS XR Software
show mpls traffic-eng fast-reroute database
MPR-174
Cisco IOS XR Multiprotocol Label Switching Command Reference
Tunnel head FRR information:
Tunnel In-label Out intf/label FRR intf/label Status
---------- -------- ---------------- ---------------- -------
tt4000 Tun hd tt1000:34 Active
tt4001 Tun hd tt1001:35 Active
tt4002 Tun hd tt1001:36 Active
The following command shows the FRR database with protected midpoints:
RP/0/RP0/CPU0:router# show mpls traffic-eng fast-reroute database
LSP midpoint FRR information:
LSP identifier In-label Out intf/label FRR intf/label Status
----------------------------- -------- ---------------- ---------------- -------
10.10.10.10 5000 [48] 18 PO0/1/0/1:18 tt2001:18 Ready
10.10.10.10 8000 [105] 19 PO0/1/0/1:19 tt2000:19 Ready
The following command shows the FRR database filtered according to the inbound label (this output
applies only to LSP midpoint entries):
RP/0/RP0/CPU0:router# show mpls traffic-eng fast-reroute database labels 18 18
LSP midpoint FRR information:
LSP identifier In-label Out intf/label FRR intf/label Status
----------------------------- -------- ---------------- ---------------- -------
10.10.10.10 5000 [48] 18 PO0/1/0/1:18 tt2001:18 Ready
The following output shows summarized information for the FRR database with the role as midpoint:
RP/0/RP0/CPU0:router# show mpls traffic-eng fast-reroute database role midpoint summary
Status Count
------- -----
Active 0
Ready 2
Partial 0
Other 0
Related Commands Command Description
show mpls traffic-eng fast-reroute log Displays the contents of the FRR event log.