Filter
Top Products
2-3
Cisco SN 5428 Storage Router Hardware Installation Guide
OL-4796-01
Chapter 2 Installing the SN 5428 Storage Router
Read Safety Notices
Warning
The plug-socket combination must be accessible at all times because it serves
as the main disconnecting device. To see translated versions of the warning,
refer to the Regulatory Compliance and Safety document that accompanied the
device.
Warning
This product relies on the building’s installation for short-circuit (overcurrent)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S.
(240 VAC, 10A international) is used on the phase conductors (all
current-carrying conductors). To see translated versions of the warning, refer
to the Regulatory Compliance and Safety document that accompanied the
device.
Warning
When installing the unit, the ground connection must always be made first and
disconnected last. To see translated versions of the warning, refer to the
Regulatory Compliance and Safety document that accompanied the device.
Warning
This equipment is intended to be grounded. Ensure that the host is connected to
earth ground during normal use. To see translated versions of the warning, refer
to the Regulatory Compliance and Safety document that accompanied the
device.
Warning
Never defeat the ground conductor or operate the equipment in the absence of
a suitably installed ground conductor. Contact the appropriate electrical
inspection authority or an electrician if you are uncertain that suitable
grounding is available. To see translated versions of the warning, refer to the
Regulatory Compliance and Safety document that accompanied the device.
Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the
card. Do not directly touch the backplane with your hand or any metal tool, or
you could shock yourself. To see translated versions of the warning, refer to the
Regulatory Compliance and Safety document that accompanied the device.