Filter
Top Products
2-25
Cisco SN 5428 Storage Router Hardware Installation Guide
OL-4796-01
Chapter 2 Installing the SN 5428 Storage Router
Connecting Power
Figure 2-18 Connecting the Console Cable
Connecting Power
The SN 5428 Storage Router can be connected to either of two power sources:
115-120 VAC/60 Hz or 230-240 VAC/50 Hz. The power supply automatically
senses the source and adjusts to either source.
To connect power to the storage router, follow these steps:
Step 1 Ensure that all site power and grounding requirements described in the Site
Preparation and Safety Guide have been met before connecting the chassis to a
power source.
Step 2 Make sure the power switch is set to off. (See Figure 2-19.)
74000
Rollover cable
RJ-45/DB-9
adapter
To PC
serial port