Filter
Top Products
2-23
Cisco SN 5428 Storage Router Hardware Installation Guide
OL-4796-01
Chapter 2 Installing the SN 5428 Storage Router
Connecting to the 10/100 Ethernet Management and HA Ports
Connecting to the 10/100 Ethernet Management and
HA Ports
To connect to the 10/100 management and HA ports, follow these steps:
Step 1 Use modular, RJ-45, straight-through UTP cables to connect the 10/100
management and HA ports to end systems. Use modular, RJ-45 cross-connect
cables to connect to external switches and routers.
Step 2 Connect the appropriate modular cables to the 10/100 management and HA ports.
(See Figure 2-17.)
Figure 2-17 Connecting to the 10/100 Management and HA Ports
Step 3
Connect the other end of the cable to the external end system, switch, or router.
73999
To HA network
equipment
To management
network equipment
Cable