Filter
Top Products
BLADES
For maximum performance, it is recommended that you
use the 36-tooth, 10 in. carbide-tipped combination blade
provided with your saw. Additional blade styles of the
same high quality are available for specific operations
such as ripping. Your local dealer can provide you with
complete information.
Kerf width must be within the limits stamped on the
spreader/riving knife.
A
WARNING: Do not use blades rated less than the
speed of this tool. Failure to heed this warning could
result in personal injury.
_The following tools (not included or drawn to scale) are needed for assembly and making adjustments:
COMBiNATiON
SQUARE
SCREWDRIVER
SCREWDRIVER
U AND10mmSOCKET
C-CLAMPS
Fig. 4
13