Craftsman 706.59668 Tool Storage User Manual


 
I CRAFTSMAN°I
TASK LIGHT REPLACEMENT
Tools Required:
Screwdriver, Crosstip
Removal
Disconnect power from the unit.
Fully extend task light assembly.
Make note of light orientation.
Remove (6) mounting screws to
remove light.
Unplug light.
Installation
Plug in new light.
Position new light in unit in same
orientation as original light.
Fasten new light in place with (6) new
mounting screws.
Reconnect power to unit.
Press to
Mounting screws
F1617